DSHack

Archive Generated December 23rd, 2018
Help me please with my KMP
Author Posted on 2016/10/25
#2454
User 348 I'm making a CT, named "Pista nel convento" in Italian, but I'm stuck at kmp editing. I've got the collision and the model of the course. Can you help me?
Here's the course model img
Author Posted on 2016/10/25
#2455
MKGirlism Okay, what is exactly going on with the KMP file?
Could you grab a screenshot of it in KMP Expander as well?
Author Posted on 2016/10/25
#2456
User 348 I didn't make anything, but I'll upload it aswell
I want to replace Toad's Circuit

Author Posted on 2016/10/25
#2457
MKGirlism But that leaves one question unanswered: What is exactly going on?
Like, did your CT crash?
Or is there something else going on?
Author Posted on 2016/10/25
#2458
User 348 No, I just don't know how to close my CT editing with KMP expander, I tried a week ago with DK Pass and the game crashed with white loading screen
Author Posted on 2016/10/25
#2459
MKGirlism Could you give a more detailed explanation?
I still don't know what's going on...
Author Posted on 2016/10/25
#2460
User 348 I'll explain:
A few days ago:

-I made a bcmdl and a kcl of Hexagonal circuit(I'll explain in PM what is Hex. Circuit)
-I didn't edited the KMP
-I uploaded those files on my SD and didn't work with white screen

Yesterday and today:
-I made bcmdl and kcl of Convent Course (?)(correct me please)
There is the question: What do I have to do to make the course KMP work?

PM: I forgot to mention I'm following this guide
Author Posted on 2016/10/25
#2461
MKGirlism First of all, to make things easier, load the OBJ file inside KMP Expander, so you can see what you're doing.
Then you remove all points from each section, but leave the first one in place, just to make life easier.

If there's nothing covering the model (like a roof, for example), you can right-click your points in, so it automatically applies the Y axis for you.

As for the white screen problem, make sure your model is above 0 on the Y-axis, for both the BCMDL, and KCL.
I've never worked with SketchUp before, but seeing how the coloured lines are clearly visible on your screenshot, it makes me think it's below 0.

Also make sure that while exporting your CMDL and CTEX files, your internal name matches the track you want to replace.
For this, you can just open Windows Explorer, select the SZS file, press F2, and then CTRL+C to copy the name.
Author Posted on 2016/10/25
#2462
User 348
As for the white screen problem, make sure your model is above 0 on the Y-axis, for both the BCMDL, and KCL.
I've never worked with SketchUp before, but seeing how the coloured lines are clearly visible on your screenshot, it makes me think it's below 0.

Thank you for the tip! But KMP Expander doesn't show me anything when I import the OBJ file :mad:
The model and kcl are on 0 on Y-axis

Edit:
Edit 2: Maybe I'm making the model too big?